These units are manufactured in a wide range of sizes and Specification options but all have the same basic function. A dial and mechanical indicator continuously monitor the Flow rate at any given time whilst electrical switches can be Specified to signal when a particular level has been reached During increasing or decreasing flow rates.
Switches are Field adjustable over the full range. Where batching, trending,totalising or recording is required, all units can be Supplied with a 0-10V or 4-20mA output.
All sizes are Manufactured to the same simple design concept, the main Characteristic of which ensures that the pressure drops are Confined to an absolute minimum (see ‘pressure drop’ charts) across the vane orifice at full flow, with viscosities as high as 600cs.
A thin, spring-mounted shutter that covers the entire flow cross-section is displaced by the flow of the liquid. The shutter has a magnet that Creates a changing magnetic field when the shutter is displaced. This field Is detected by an analogue hall-sensor. Due to the spring properties of the Shutter and a molded stop, even media impacts can be withstood. The Low number of parts coming into contact with media guarantees low Soiling properties and reliable operation.
Flow switch is the target type unit that works on the Magnetic principle of attraction. As the flow causes the flapper to deflect the magnet moves closer to or Further away from the switch causing the reed switch to actuate. Switching action is determined by flow & not by pressure. The unique features of reed switch Technique is adopted unique design, magnetic switching and UN-compromised quality have resulted UN-parallel reliability.
Globe type flow switches are reliable control devices for signaling high or low flow condition in a process system. These are designed on variable area principle and hence, its accuracy and reliability is fully assured.
Type flow switches are reliable control devices for signaling high or low flow condition in a process system. These are designed on variable area principle and hence, its accuracy and reliability is fully assured.
Compact type, magnetically actuated piston type flow switches are designed for positive detection of fluid flow through your equipment. Fs series models provide adjustability over wide range. These are used in fluid lines carrying non-hazardous fluids like water, kerosene, very low viscosity lubricating oils, gas etc.
The rotameter is a simplest form of fluid measuring instrument. It consist of a borosilicate tapered glass tube placed vertically with its smaller diameter at the bottom. The float used in the tube is made up of heavier non-corrosive substance which resists the vertical flow of the fluid passing through the annular space between the tube and the head of float. The fluid passing through the orifice, balances the weight of the float in the metered fluid and in equilibrium position, indicates the flow rate of the fluid against a calibrated external scale fitted by the side of the tube.
The model SF-100 is a flanged/screwed sight flow Indicator with a cast/ fabricated body. This sight Flow indicator provides visual observation and Monitoring of the process flow stream. Available Devices to enhance visibility include, flapper and Rotator. Bodies are available in bronze, iron, steel and Stainless steel. Special alloys are also available. Standard units are available in #150, #300 and #600 ANSI ratings.
Thermal dispersion flow switch monitors are compact Switches, with no moving parts, that can monitor and control The flow of liquid, air, and gas in pipes and ducts. They can also be used for single point level control of liquid or for interface Detection between mediums. Sitron’s series of flow switches Are available in five different models that provide for different Power supply, output, environmental and connection requirements.
These units are manufactured in a wide range of sizes and Specification options but all have the same basic function. A dial and mechanical indicator continuously monitor the Flow rate at any given time whilst electrical switches can be Specified to signal when a particular level has been reached During increasing or decreasing flow rates. Switches are Field adjustable over the full range. Where batching, trending, Totalizing or recording is required, all units can be Supplied with a 0-10V or 4-20mA output. All sizes are Manufactured to the same simple design concept, the main Characteristic of which ensures that the pressure drops are Confined to an absolute minimum (see ‘pressure drop’ charts) Across the vane orifice at full flow, with viscosities as high as 600cs.
These units are manufactured in a wide range of sizes and Specification options but all have the same basic function. A dial and mechanical indicator continuously monitor the Flow rate at any given time whilst electrical switches can be Specified to signal when a particular level has been reached During increasing or decreasing flow rates.
Switches are Field adjustable over the full range. Where batching, trending,totalising or recording is required, all units can be Supplied with a 0-10V or 4-20mA output.
All sizes are Manufactured to the same simple design concept, the main Characteristic of which ensures that the pressure drops are Confined to an absolute minimum (see ‘pressure drop’ charts) across the vane orifice at full flow, with viscosities as high as 600cs.
A thin, spring-mounted shutter that covers the entire flow cross-section is displaced by the flow of the liquid. The shutter has a magnet that Creates a changing magnetic field when the shutter is displaced. This field Is detected by an analogue hall-sensor. Due to the spring properties of the Shutter and a molded stop, even media impacts can be withstood. The Low number of parts coming into contact with media guarantees low Soiling properties and reliable operation.
Flow switch is the target type unit that works on the Magnetic principle of attraction. As the flow causes the flapper to deflect the magnet moves closer to or Further away from the switch causing the reed switch to actuate. Switching action is determined by flow & not by pressure. The unique features of reed switch Technique is adopted unique design, magnetic switching and UN-compromised quality have resulted UN-parallel reliability.
Globe type flow switches are reliable control devices for signaling high or low flow condition in a process system. These are designed on variable area principle and hence, its accuracy and reliability is fully assured.
Type flow switches are reliable control devices for signaling high or low flow condition in a process system. These are designed on variable area principle and hence, its accuracy and reliability is fully assured.
Compact type, magnetically actuated piston type flow switches are designed for positive detection of fluid flow through your equipment. Fs series models provide adjustability over wide range. These are used in fluid lines carrying non-hazardous fluids like water, kerosene, very low viscosity lubricating oils, gas etc.
The rotameter is a simplest form of fluid measuring instrument. It consist of a borosilicate tapered glass tube placed vertically with its smaller diameter at the bottom. The float used in the tube is made up of heavier non-corrosive substance which resists the vertical flow of the fluid passing through the annular space between the tube and the head of float. The fluid passing through the orifice, balances the weight of the float in the metered fluid and in equilibrium position, indicates the flow rate of the fluid against a calibrated external scale fitted by the side of the tube.
The model SF-100 is a flanged/screwed sight flow Indicator with a cast/ fabricated body. This sight Flow indicator provides visual observation and Monitoring of the process flow stream. Available Devices to enhance visibility include, flapper and Rotator. Bodies are available in bronze, iron, steel and Stainless steel. Special alloys are also available. Standard units are available in #150, #300 and #600 ANSI ratings.
Thermal dispersion flow switch monitors are compact Switches, with no moving parts, that can monitor and control The flow of liquid, air, and gas in pipes and ducts. They can also be used for single point level control of liquid or for interface Detection between mediums. Sitron’s series of flow switches Are available in five different models that provide for different Power supply, output, environmental and connection requirements.
These units are manufactured in a wide range of sizes and Specification options but all have the same basic function. A dial and mechanical indicator continuously monitor the Flow rate at any given time whilst electrical switches can be Specified to signal when a particular level has been reached During increasing or decreasing flow rates. Switches are Field adjustable over the full range. Where batching, trending, Totalizing or recording is required, all units can be Supplied with a 0-10V or 4-20mA output. All sizes are Manufactured to the same simple design concept, the main Characteristic of which ensures that the pressure drops are Confined to an absolute minimum (see ‘pressure drop’ charts) Across the vane orifice at full flow, with viscosities as high as 600cs.